GaAs SP3T 2.7 V CDMA-GPS Switch

DC - 2.5 GHz

MASWSS0200

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V1

2

RoHS

Compliant

1

1. External DC blocking capacitors are required on all RF ports.

2. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 500 MHz, 100 pF for 0.5 - 2.5 GHz.

Parameter

Test Conditions

Units

Min.

Typ.

Max.

(All Paths)

1.0 GHz

1.5 GHz

2.0 GHz

dB

dB

dB

—

—

—

0.55

0.60

0.70

0.70

0.75

0.90

Isolation

DC - 1.0 GHz

1.0 - 2.0 GHz

2.0 - 2.5 GHz

dB

dB

dB

23

18

16

27

21

20

—

—

—

Return Loss

(All RF ports)

DC - 2.5 GHz

dB

—

20

—

IP3

Two Tone, +22 dBm/tone, 1 MHz Spacing, 820 MHz

Two Tone, +22 dBm/tone, 1 MHz Spacing, 1880 MHz

dBm

dBm

—

—

62

61

—

—

Cross Modulation

For Cell Band: Two-tone signal input:

Tx1 = +22 dBm @ 820 MHz, Tx2 = +22 dBm @ 821 MHz,

RX interfere = -23 dBm @ 869 MHz

dBm

—

-101

—

For PCS Band: Two-tone signal input:

Tx1 = +18 dBm @ 1880 MHz, Tx2 = +18 dBm @ 1881 MHz,

RX interfere = -23 dBm @ 1960 MHz

dBm

—

-102

—

P.1dB

Vc = 0 V / 2.7 V, 1 GHz

dBm

—

36

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF, 900 MHz

µS

—

0.06

—

Ton, Toff

50% control to 90% RF, and 50% control to 10% RF, 900 MHz

µS

—

0.09

—

Transients

In Band

mV

—

70

—

Control Current

Vc = 0 V / 2.7 V

µA

—

—

30

V1

V2

V3

ANT-RF1 ANT-RF2 ANT-RF3

1

0

0

On

Off

Off

0

1

0

Off

On

Off

0

0

1

Off

Off

On

5.

Differential voltage, V (state 1) -V (state 0) must be 2.6 V

minimum and must not exceed 8.5 V.

6.

0 = -5 V to 2.4 V, 1 = -2.4 V to 5 V.

Parameter

Absolute Maximum

Input Power

(0.5 - 2.5 GHz, 2.7 V Control)

+36 dBm

Control Voltage

±8.5 volts

Operating Temperature

Storage Temperature

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.