GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch

DC - 2.5 GHz

MASWSS0201

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V1

4

RoHS

Compliant

Lead-Free 3 mm 12-lead PQFN

†

C1-C5=10000 pf

C6=100 pf

Application Schematic

11,12

11. Non-connected pins (P1 and P5) are shown connected to

ground as recommended. All data on this datasheet was

taken with N/C pins connected to ground.

12. Application

schematic

shown

is

for

terminated

configuration.

For non-terminated operation Term 1 and

Term 2 ground pins are left open. See application section

for data in unterminated configuration.

Qualification

Qualified

to

M/A-COM

specification

REL-201,

Process Flow –2.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

M/A-COM’s AN3007 Application Note outlines a

method for ESD sensitivity mitigation. It can be

found

at

the

Tech/Apps

section

of

the

MACOM.COM website.

†

Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.