Part No.

English

Metric

Sq. Drive

01-9232

5–50 in.-lb

56–564 cNm

1/4”

01-9233 10-100 in.-lb 112-1129 cNm

1/4”

01-9240

5-50 ft.-lb.

6-67 Nm

3/8”

01-9242 25-250 ft.-lb.

33-338 Nm

1/2”

Square drives conform to ASME B107 standards for

proper fit with transducer.

22

Utica® TA4 Torque Analyzer

The Utica TA4 is a great asset to

any quality assurance program

where torque analysis is

required. The TA4 provides torque verification

for a wide range of hand and power tools. This

includes dial, beam and click type torque

wrenches, most screwdrivers, and even pulse

tools. This versatile analyzer offers the operator a

variety of ways to easily verify torque applied with

a selection of seven engineering units: Oz In, Lb

In, Lb Ft, Nm, cNm, KgfCm, Kgfm. Plus, three

modes of operation are available – track, peak,

and first peak.

Data output can be viewed via the LCD display,

or downloaded to a computer at high speed.

Data is compatible with Windows 95, NT, and

Windows 98 for easy downloading. Each TA4

includes an RS-232 cable to complete the

connection between torque analyzer and

computer. Plus, instructions are included

on how to implement downloads.

s Internal accuracy +/-0.5% from 20% to 100% of range;

+/-1.0% from 10% to 19% of range.

s Clockwise and counterclockwise operation.

s Selectable filtering speeds: 500Hz, 1000Hz, 1800Hz, and

3000Hz – for accurate torque readings on pulse tools made by

a variety of manufacturers.

s NiMH rechargeable batteries provide 8-10 hours of continuous use.

s Can be mounted vertically or horizontally for added flexibility.

s Manual and auto reset functions to clear displayed values.

s Built-in sleep mode to save power when not in use.

s Includes an audio and visual alarm when high or low torque

limit is reached.

s Certificate of calibration supplied with each unit traceable to the

National Institute of Standards and Technology (NIST).

s 110 volt and 220 volt models available.

110V

220V

Torque Range

Square Drive

Model

Model

English

Metric

In.

mm

TA4-05B-1

TA4-05B-2

5–50 in.-lb.

.56–5.64 Nm

1/4

6.35

TA4-10B-1

TA4-10B-2

10–100 in.-lb.

1.13–11.29 Nm

1/4

6.35

TA4-05F-1

TA4-05F-2

5–50 ft.-lb.

6.78–67.79 Nm

3/8

9.53

TA4-25F-1

TA4-25F-2

25–250 ft.-lb

33.90–338.95 Nm

1/2

12.7

Run Down Adapters*

Part No.

01-9201

110V power supply for all TA4 systems

01-9202

220V power supply for all TA4 systems

Power Supplies*

Part No.

01-9205 RS-232 Cable

Cable*

*Each TA4 unit comes complete with the appropriate rundown fixture, power supply, RS-232 cable and case.