MPC8250VR datasheet(42/60 Pages) FREESCALE

42 / 60 page

MPC8250 Hardware Specifications, Rev. 1

Freescale Semiconductor

Pinout

Symbols used in Table 19 are described in Table 20.

4.2

VR Package

The following figures and table represent the alternate 516 PBGA package. For information on the

standard package for the MPC8250, refer to Section 4.1, “ZU Package” on page 29.

THERMAL0 4

AA1

THERMAL14

AG4

I/O power

AG21, AG14, AG8, AJ1, AJ2, AH1,

AH2, AG3, AF4, AE5, AC27, Y27,

T27, P27, K26, G27, AE25, AF26,

AG27, AH28, AH29, AJ28, AJ29,

C7, C14, C16, C20, C23, E10, A28,

A29, B28, B29, C27, D26, E25, H3,

M4, T3, AA4, A1, A2, B1, B2, C3,

D4, E5

Core Power

U28, U29, K28, K29, A9, A19, B19,

M1, M2, Y1, Y2, AC1, AC2, AH19,

AJ19, AH10, AJ10, AJ5

Ground

AA5, AF21, AF14, AF8, AE7, AF11,

AE17, AE23, AC26, AB25, Y26,

V25, T26, R25, P26, M25, K27, H25,

G26, D7, D10, D14, D16, D20, D23,

C9, E11, E13, E15, E19, E22, B3,

G5, H4, K5, M3, P5, T4, Y5, AA2,

AC3

The default configuration of the CPM pins (PA[0–31], PB[4–31], PC[0–31], PD[4–31]) is input. To prevent excessive

DC current, it is recommended to either pull unused pins to GND or VDDH, or to configure them as outputs.

Must be pulled down or left floating.

If PCI is not desired, this pin should be pulled up or left floating.

For information on how to use this pin, refer to

MPC8260 PowerQUICC II Thermal Resistor Guide (AN2271/D)

available at www.freescale.com.

Table 20. Symbol Legend

Symbol

Meaning

OVERBAR

Signals with overbars, such as TA, are active low.

MII

Indicates that a signal is part of the media independent interface.

Table 19. MPC8250 ZU Package Pinout List (continued)

Pin Name

Ball

MPC8250VR 数据表(PDF) 42 Page - Freescale Semiconductor, Inc

MPC8250VR 数据表(HTML) 42 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

数据表下载