Preliminary Technical Data

ADL5532

Rev. PrD 5/07 | Page 5 of 8

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

5CLIN

8FBK2

NC 4

6NC

RFIN 2

7RFOUT

NC 3

FBK 1

PIN 1

INDICATOR

TOP VIEW

(Not to Scale)

ADL5532

Figure 2. Pin Configuration

Table 3. Pin Function Descriptions Single

Pin

No.

Mnemonic

Description

1,8

FBK1, FBK2

For operation below 50 MHz a 100nF capacitor should be connected between these pins.

2

RFIN

RF Input: Requires a DC blocking capacitor. For normal operating conditions a 10 nF capacitor is recommended

7

RFOUT

RF Output and Bias: DC bias provided to this pin through an inductor. For normal operating conditions a 470

nH inductor is recommended. RF path requires a DC blocking capacitor. For normal operating conditions a 10

nF capacitor is recommended.

3, 4, 6

NC

No Connect

5

CLIN

A 100 nF capacitor connected between pin 5 and ground provides decoupling for the on board linearizer.

Exposed

Paddle

Internally connected to GND. Solder to a low impedance ground plane