PL75-60 datasheet(75/100 Pages) EMERSON-NETWORKPOWER

75 / 100 page

Trompeter provides cable connectors with configurations

designed to provide tough, durable terminations on specific

cables. Cable connector part numbers reference a specific

cable group number for a specific cable type, model, and/or

manufacturer. This ensures that the connector fits your cable and

provides the toughest termination available in the industry.

If you know the part number and manufacturer of your cable, you

can locate the cable's assigned cable group number using the

cable group table in the following pages.

If you have a Trompeter connector, you can determine the cable

group number by the last hyphenated suffix, (usually 1 to 3 digits).

Example: UPL220-026 = cable group number -026

If you cannot satisfy your connector requirements with the

standard cable group number, or have a special requirement,

contact your local Trompeter representative listed on the back

inside cover of this catalog, or you can visit our website at www.

EmersonConnectivity.com to find the sales rep nearest you.

Contact customer service for more information.

Note: Cables of the same type and specification may vary from

manufacturer to manufacturer. Always verify the cable group

number for your connector type and manufacturer.

The symbol -

after the part numbers listed in this catalog

indicates that you should refer to the cable group table in the

proceeding pages.

Wrench style = Wrench Crimp

Crimp style = Tool Crimp

If your cable group is not listed, contact customer service for assistance.

Cable Group Table Notes

Note: All dimensions in the proceeding Cable Group Table are in thousandths of

an inch.

Appendix

For a complete listing please refer to the online catalog.

PL75-60 数据表(PDF) 75 Page - Emerson Network Power