MP3362

– SINGLE-STRING, 3V MINIMUM Vin, 36V BOOST LED DRIVER

MP3362 Rev. 1.1

www.MonolithicPower.com

4

2/22/2023

MPS Proprietary Information. Patent Protected Unauthorized Photocopy and Duplication Prohibited.

© 2023 MPS. All Rights Reserved.

ABSOLUTE MAXIMUM RATINGS (1)

VIN, VSW......................................-0.3V to +40V

All other pins ................................-0.3V to +5.3V

Continuous power dissipation (TA = 25°C) (2)

TSOT23-8 ................................................ 1.25W

Junction temperature ................................150°C

Lead temperature .....................................260°C

S

torage temperature……..…… -65°C to +150°C

ESD Ratings

Human body model (HBM) ................... ±2000V

Charged device model (CDM)................±1000V

Recommended Operating Conditions (3)

Supply voltage (VIN) ............................3V to 36V

Maximum LED load voltage (VLED)............... 36V

Operating junction temp........... -40°C to +125°C

Thermal Resistance (4)

θJA

θJC

TSOT23-8……….…................…100........55...°C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature, TJ (MAX), the junction-to-

ambient thermal resistance,

θ

JA, and the ambient temperature,

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX) - TA) / θJA. Exceeding the maximum allowable power

dissipation will produce an excessive die temperature, causing

the regulator to go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its operating

conditions.

4) Measured on JESD51-7, 4-layer PCB.