Absolute maximum ratings

LM158-LM258-LM358

4/20

2

Absolute maximum ratings

Table 1.

Absolute maximum ratings

Symbol

Parameter

LM158,A

LM258,A

LM358,A

Unit

Supply voltage

+/-16 or 32

V

Input voltage

32

V

Differential input voltage

32

V

1.

exceeded.

500

mW

2.

from simultaneous short-circuits on all amplifiers.

Infinite

3.

This input current only exists when the voltage at any of the input leads is driven negative. It is due to the

collector-base junction of the input PNP transistor becoming forward biased and thereby acting as input

diode clamps. In addition to this diode action, there is also NPN parasitic action on the IC chip. This

for a large overdrive) for the time during which an input is driven negative.

This is not destructive and normal output is restored for input voltages above -0.3 V.

50

mA

Operating free-air temperature range

-55 to +125 -40 to +105

0 to +70

°C

Storage temperature range

-65 to +150

°C

Maximum junction temperature

150

°C

SO-8

MiniSO-8

TSSOP8

DIP-8

4.

Short-circuits can cause excessive heating and destructive dissipation.

5.

125

190

120

85

°C/W

Thermal resistance junction to case

SO-8

MiniSO-8

TSSOP8

DIP-8

40

39

37

41

°C/W

ESD

6.

Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a

1.5k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

300

V

7.

Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

200

V

8.

Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to the ground through only one pin. This is done for all pins.

1.5

kV