| 数据搜索系统,热门电子元器件搜索 |
|
DSPIC33F 数据表(PDF) 49 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DSPIC33F 数据表(HTML) 49 Page - Microchip Technology |
|
49 / 80 page ![]() © 2007 Microchip Technology Inc. Preliminary DS70152D-page 49 dsPIC33F/PIC24H PROGRAMMING SPECIFICATION TABLE 4-1: PROGRAMMING EXECUTIVE COMMAND SET 4.2.4 COMMAND DESCRIPTIONS All commands supported by the programming executive are described in Section 5.2.5 “SCHECK Command” through Section 4.2.12 “QVER Command”. 4.2.5 SCHECK COMMAND The SCHECK command instructs the programming executive to do nothing but generate a response. This command is used as a “Sanity Check” to verify that the programming executive is operational. Expected Response (2 words): 0x1000 0x0002 Opcode Mnemonic Length (16-bit words) Time Out Description 0x0 SCHECK 1 1 msec Sanity check. 0x1 READC 3 1 msec Read an 8-bit word from the specified Configuration register or Device ID register. 0x2 READP 4 1 msec/row Read ‘N’ 24-bit instruction words of code memory starting from the specified address. 0x3 RESERVED N/A N/A This command is reserved. It will return a NACK. 0x4 PROGC 4 5 msec Write an 8-bit word to the specified Configuration register. 0x5 PROGP 99 5 msec Program one row of code memory at the specified address, then verify. 0x6 PROGW 5 5 msec Program one instruction word of code memory at the specified address, then verify. 0x7 RESERVED N/A N/A This command is reserved. It will return a NACK. 0x8 RESERVED N/A N/A This command is reserved. It will return a NACK. 0x9 RESERVED N/A N/A This command is reserved. It will return a NACK. 0xA QBLANK 2 TBD Query if the code memory is blank. 0xB QVER 1 1 msec Query the programming executive software version. 0xC RESERVED N/A N/A This command is reserved. It will return a NACK. 0xD RESERVED N/A N/A This command is reserved. It will return a NACK. Legend: TBD = To Be Determined Note: One row of code memory consists of (64) 24-bit words. Refer to Table 2-2 for device-specific information. 15 12 11 0 Opcode Length Field Description Opcode 0x0 Length 0x1 Note: This instruction is not required for programming, but is provided for development purposes only. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |