OP162/OP262/OP462

Data Sheet

Rev. H | Page 6 of 20

ABSOLUTE MAXIMUM RATINGS

Table 4.

Parameter

Min

Supply Voltage

±6 V

Input Voltage1

±6 V

Differential Input Voltage2

±0.6 V

Internal Power Dissipation

SOIC (S)

Observe Derating Curves

TSSOP (RU)

Observe Derating Curves

Output Short-Circuit Duration

Observe Derating Curves

Storage Temperature Range

–65°C to +150°C

Operating Temperature Range

–40°C to +125°C

Junction Temperature Range

–65°C to +150°C

Lead Temperature Range

(Soldering, 10 sec)

300°C

1 For supply voltages greater than 6 V, the input voltage is limited to less than

or equal to the supply voltage.

2 For differential input voltages greater than 0.6 V, the input current should be

limited to less than 5 mA to prevent degradation or destruction of the input

devices.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Table 5.

Package Type

θJA1

θJC

Unit

8-Lead SOIC (S)

157

56

°C/W

8-Lead TSSOP (RU)

208

°C/W

14-Lead SOIC (S)

105

°C/W

14-Lead TSSOP (RU)

148

°C/W

1 θJA is specified for the worst-case conditions, that is, θJA is specified for a

device soldered in circuit board for SOIC, and TSSOP packages

.

ESD CAUTION