-11-

RED HIGH FLUX LED

HR310

<070523> Rev. 1.5

서식번호 : QP-7-03-05 (Rev.00)

Precaution for Use

• Before opening the package

a. Avoid the absorption of moisture, we recommended to store High Flux LEDs in a dry

box(or desiccator) with a desiccant . Otherwise, store them in the following environment:

Temperature : 5℃~30℃ Humidity : 50% max.

b. The products should be used in 3 months. It is recommended that the LEDs be used as

soon as possible.

• After opening the package

a. Soldering should be done right after opening the package(within 24Hrs).

b. Keeping of a fraction

- Sealing

- Temperature : 5 ~ 40℃, Humidity : less than 30%

c. If the package has been opened more than 1week or the color of desiccant changes,

components should be dried for 10-12hr at 60±5℃

• Any mechanical force or any excess vibration shall not be accepted to apply during cooling

process to normal temp. after soldering.

• Avoid quick cooling

• Leadframes are silver plated copper alloy. The silver plate surface may be affected by

environments which contains corrosive substances. Please avoid conditions which may cause

the LEDs to corrode, tarnish or discolor.

2) Static Electricity

• Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist

band or an anti-electrostatic glove be used when handling the LEDs.

• All devices, equipment and machinery must be grounded properly. It is recommended that

precautions should be taken against surge voltage to the equipment that mounts the LEDs.