E53-R4R4 datasheet(6/22 Pages) OMRON

6 / 22 page

I-68

Digital Controller

E5CK

Nomenclature

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Operation Indicators

A/M Key

No. 1 Display

No. 2 Display

Up Key/Down Key

Display Key

• OUT1

Lights when the pulse output

function assigned to control

output 1 turns ON.

• OUT2

Lights when the pulse output

function assigned to control

output 2 turns ON.

• SUB1

Lights when the output func-

tion assigned to auxiliary

output 1 turns ON.

• MANU

Lights when the manual op-

eration mode.

• STOP

Lights during operation has

stopped.

• RMT

Lights during remote opera-

tion.

• AT

Flashes during auto-tuning.

Press to select the auto operation or

manual operation.

Press for less than 1 s to shift the

display to the next parameter. When

this key is pressed for 1 s or more,

the menu screen will be displayed in

any case.

Press to increase or decrease the

value on the No.2 display.

Displays the set point, set point dur-

ing SP ramp, manipulated variable,

or parameter settings.

Displays the process value or pa-

rameter symbols.

53 x 53

100

+0.6

E5CK

Panel Cutouts

65 min.

60 min.

Note: 1. Recommended panel thickness is 1 to 5 mm.

2. Maintain the specified vertical and horizontal mount-

ing space between each Unit. Units must not be

closely mounted vertically or horizontally.

E53-R4R4 数据表(PDF) 6 Page - Omron Electronics LLC

E53-R4R4 数据表(HTML) 6 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

数据表下载