REV. G

AD706

–3–

SPECIFICATIONS (continued)

AD706J/A

Parameter

Conditions

Min

Typ

Max

Unit

POWER SUPPLY

Rated Performance

±15

V

Operating Range

±2.0

±18

V

Quiescent Current, Total

0.75

1.2

mA

TMIN to TMAX

0.8

1.4

mA

TRANSISTOR COUNT

Number of Transistors

90

NOTES

1Bias current specifications are guaranteed maximum at either input.

2Input bias current match is the difference between corresponding inputs (I

B of –IN of Amplifier 1 minus IB of –IN of Amplifier 2).

CMRR match is the difference between

∆

∆

V

V

OS1

CM

for Amplifier 1 and

∆

∆

V

V

OS2

CM

for Amplifier 2, expressed in dB.

PSRR match is the difference between

∆

∆

V

V

OS1

SUPPLY

for Amplifier 1 and

∆

∆

V

V

OS2

SUPPLY

for Amplifier 2, expressed in dB.

All min and max specifications are guaranteed.

Specifications subject to change without notice.

ABSOLUTE MAXIMUM RATINGS

1

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±18 V

Internal Power Dissipation

(Total: Both Amplifiers)

2 . . . . . . . . . . . . . . . . . . . . 650 mW

Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±V

S

Differential Input Voltage

3 . . . . . . . . . . . . . . . . . . . . . . +0.7 V

Output Short Circuit Duration . . . . . . . . . . . . . . . . Indefinite

Storage Temperature Range (N, R) . . . . . . . –65

°C to +125°C

Operating Temperature Range

AD706J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

°C to +70°C

AD706A . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

Lead Temperature (Soldering 10 secs) . . . . . . . . . . . . . 300

°C

NOTES

1Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

2Specification is for device in free air:

8-Lead P

DIP Package: θ

JA = 100

°C/W

8-Lead Small Outline Package:

θ

JA = 155

°C/W

3The input pins of this amplifier are protected by back-to-back diodes. If the

differential voltage exceeds

±0.7 V, external series protection resistors should be

added to limit the input current to less than 25 mA.

METALIZATION PHOTOGRAPH

Dimensions shown in inches and (mm).

Contact factory for latest dimensions.

2

1

3

4

5

6

7

8

OUTPUT A

–INPUT A

+INPUT A

–VS

0.074 (1.88)

OUTPUT B

–INPUT B

+INPUT B

+VS

ESD CAUTION