Features

•

High-voltage rail up to 400 VDC (limited by on-board bulk capacitor)

•

Output current up to 1.2 Apeak (adjustable overcurrent protection threshold)

•

Output power up to 120 W

•

Driver DC input voltage range: 9 V to 20 V

•

Power system-in-package integrating gate drivers and high-voltage power

MOSFETs:

–

RDS(ON) = 1.38 Ω

–

BVDSS = 500 V

•

Selectable single or three-shunt current sensing topology

•

Sensored or sensorless FOC or 6-step algorithm

•

Hall effect sensor connector

•

Smart shutdown overcurrent protection

•

Bus voltage sensing

•

Connector for interfacing with MCU

•

RoHS compliant

Description

The EVLPWD5T60 evaluation board is a 3-phase power board that allows to

evaluate all of the PWD5T60 features.

The board is designed to support a three-shunt or a single-shunt current sensing

topology.

A strip connector allows easy interfacing with an MCU control board. The 34-pin ST

morpho allows to connect the EVLPWD5T60 board to an STM32 Nucleo board

through the X-NUCLEO-IHM09M1 motor control connector expansion board.

The PWD5T60 is a 3-phase high-density power driver integrating gate driver and six

N-channel power MOSFETs. It has dedicated input pins for each output and a

shutdown pin. The logic inputs are CMOS/TTL compatible down to 3.3 V for easy

interfacing with control devices.

Product status link

EVLPWD5T60

Evaluation board for the PWD5T60 compact high-voltage 3-phase power stage

with integrated gate driver

EVLPWD5T60

Data brief

DB5226 - Rev 2 - May 2024

For further information contact your local STMicroelectronics sales office.

www.st.com