Unique, compact, convenient

The Fluke PRV240FS Proving Unit is a portable, pocket-sized,

battery-powered voltage source. It is specifically built to prove the

functionality of the FieldSense measurement on the T6 electrical

testers. It also provides ac and dc voltages for other HiZ instru-

ments in your tool box.

Designed for safety and compliance

The Fluke PRV240FS provides a safe method to verify that your T6

electrical tester is operating properly before you conduct any live

tests. The concept of “Test Before Touch” (TBT) involves testing

your T6 against a known live source before and after the actual

measurement. This sequence verifies that your test tool is operating

properly during the actual measurement.

Verify your test tool without unnecessary exposure to shock and

arc flash. Using the PRV240FS reduces the need for personal

protective equipment (PPE) when a known voltage source is not

available for verification of your tester or multimeter before test

before TBT are performed. PPE is still needed for absence of voltage

testing when appropriate.

Key benefits

•

Using the PRV240FS reduces the risk of shock and arc flash by

validating the functionality of test tools without placing yourself

in a potentially hazardous electrical environment.

•

Can prove functionality of the FieldSense measurement on the T6

electrical testers

•

Sources both ac and dc steady-state voltage—supplies 240 V dc/ac.

•

A single switch and a set of LEDs indicate functionality of both

the FieldSense “no-test-lead” voltage measurement capability,

plus standard ac and dc measurements with test leads. This unit

is a simple-to-use solution for complying with TBT verification of

your test tools.

•

Compatible with high impedance multimeters or clamp meters.

•

Voltage is sourced through a central hub designed to test the T6

FieldSense open fork, as well as through recessed contacts that

are activated when test probes are inserted to avoid accidental

contact

•

Includes TPAK magnetic hanging strap

•

Long battery life—2000 tests per set of four AA batteries

(10 second test average)

Fluke PRV240FS Proving Unit

For use with T6 Electrical Testers,

DMMS and current clamps

REDUCES RISK

Reduces the risk of shock and arc

flash risk hazard

BATTERY LIFE

2000 tests per set of four AA

batteries

SIMPLE TO USE

Single switch selects mode, LEDs

indicate functionality

SAFETY RATING

IEC61010-1, IEC61010-2-030

WARRANTY

One-year

TECHNICAL DATA