SWC-101F-R1 and SWC-101M-R1

Rev 1.3

www.eravant.com | 501 Amapola Ave, Torrance, CA 90501

Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com

Page | 3

W-Band Waveguide to 1.0 mm Connector Adapter, Right Angle

Copyright © 2022 by Eravant

Note:

• All data presented is collected from a sample lot. Actual data may vary unit to unit, slightly.

• All testing was performed under +25 °C case temperature.

• Eravant reserves the right to change the information presented without notice.

Caution:

• Any foreign objects in the waveguide will cause performance degradation and may damage the

adapter.

• Proper torque, 4.0 ± 0.15 inch-pounds (0.45 ± 0.02 Nm), should be used. Eravant torque

wrench, model SCH-06004-S1, is highly recommended.