5.8 Typical Characteristics (continued)

Operation of the device at these or any other conditions beyond those indicated in the Recommended Operating Conditions

table are not implied.

‡The areas under the curves represent conditions that can cause the device to oscillate. For VKA = 2V and 3V curves, R2 and Vbat

were adjusted to establish the initial VKA and IK conditions with CL = 0. Vbat and CL then were adjusted to determine the ranges of

stability.

Figure 5-18. Stability Boundary Conditions

TLV431, TLV431A, TLV431B

SLVS139Z – JULY 1996 – REVISED JUNE 2024

www.ti.com

14

Submit Document Feedback

Copyright © 2024 Texas Instruments Incorporated

Product Folder Links: TLV431 TLV431A TLV431B