PRODUCT SHEET

Dimensions with connectors (L x W x H)

98 x 27 x 144 mm / 3.85 x 1.06 x 5,67 in

Weight

150 grams, 0.33 lb

IP rating

IP20

Housing material

PC ABS, UL 94 VO

Mounting

DIN rail (35 * 7,5/15)

Operating temperature

-25 to 70° C,-13 to 158° F

Configuration

Web based via Ethernet configuration port

Industrial network connector(s)

2xRJ45 10/100 Mbit (daisy chaining) / DB9 (PROFIBUS)

Certification

CE, UKCA, UL ord loc (E214107), KC, RMC

MTBF

> 1 500 000 h, Telcordia Method I Case 3 at 30° C

Input voltage

12- 30 VDC

Current consumption

Typical: 160 mA @ 24V Max: 400 mA @ 12V

Power connector

3-pin plug with screw terminal

Protection

Reverse voltage protection and short circuit protection

General

Power

Network specifications

PROFINET IO Device

EtherCAT SubDevice

- Transfer up to 1 024 bytes from PROFINET

- Transfer up to 1 024 bytes to

PROFINET

- Total supported cyclic process data: 2048 bytes

- 1 ms minimum cycle time

- Conformance class B, Real-Time (RT)

- Network load robustness, Netload Class III

- Transfer up to 1 486 bytes from EtherCAT

- Transfer up to 1 486 bytes to EtherCAT

- Total supported process data: 2 972 bytes

- EtherCAT SubDevice according to IEC 61158 Type 12

(ETG.1000)

- Network cycle time down to 100 μs

- Supports CANopen over EtherCAT

Ethernet/IP Adapter

PROFIBUS DP Device (DPV1/DPV0)

- Transfer up to 1 448 bytes to EtherNet/IP

- Transfer up to 1 448 bytes from EtherNet/IP

- Total supported cyclic process data: 2896 bytes

- Class 1 and Class 3 connection for process data

- Device Level Ring (beacon mode)

- Quick Connect class B

- Transfer up to 244 bytes to PROFIBUS

- Transfer up to 244 bytes from PROFIBUS

- Total supported process data: 488 bytes

- Automatic baud rate detection up to 12 Mbit/s

- Sync, Freeze and Watchdog

- I&M Ident numbers 0-31x

Modbus TCP Client

- Transfer up to 1 500 bytes to Modbus TCP devices

- Transfer up to 1 500 bytes from Modbus TCP devices

- Total supported cyclic process data: 3000 bytes

- Up to 64 nodes

- Drag and drop I/O configuration for data mapping

- Transfer data cyclically or on data change

- 10ms minimum cycle time

- Gateway latency < 1ms

- Endian conversion (without affecting latency)

- Live list and data exchange control per transaction

Scan for more info

about our products