5

PI3USB102

USB 2.0 High-Speed (480 Mbps) Signal Switch

Targeted for Battery Powered Applications

P-0.6

03/27/07

Voltage Waveforms Propagation Delay Times

Switching Waveforms

Voltage Waveforms Enable and Disable Times

Applications Information

Logic Inputs

The logic control inputs can be driven up to +3.6V regardless of the supply voltage. For example, given a +3.3V supply, the output

enables or select pins may be driven low to 0V and high to 3.6V. Driving IN Rail-to-Rail® minimizes power consumption.

Power Supply Sequencing

Proper power supplysequencing is recommended for all CMOS devices. Always apply VCC and GND before applying signals to

input/output or control pins.

Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.

tPLZ

1.25V

1.25V

2.5V

VOH

0V

VOL

VDD/2

VDD/2

tPHZ

tPZL

tPZH

Waveform 1

Waveform 2

VOL +0.3V

VOH –0.3V

VOL

VOH

SEL

Input

2.5V

2.5V

2.5V

2.5V

3.5V

1.5V

Output

07-0095