240128-06-FC-R-ST-LED-GY datasheet(19/32 Pages) ETC2

19 / 32 page

SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY MODULE

MODEL NO: 240128-06

Pacific Display Devices

03.07.2006

● Mode Set

Code

Function

Operand

1000x000

"OR" Mode

---

1000x001

"EXOR" Mode

---

1000x011

"AND" Mode

---

1000x100

"TEXT ATTRIBUTE" Mode

---

10000xxx

Internal Character Generator Mode

---

10001xxx

External Character Generator Mode

---

x : Don’t care

The display mode is defined by this command. The display mode don’t have changed until to send next this command.

Logically "OR" , "EXOR", "AND" of text and graphic dispaly can be displayed.

When internal character generator mode is selected, character code 00H~7FH are selected from built-in character

generator ROM. The character code 80H~FFH are automatically selected external character generator RAM.

(Example)

Graphic

Text

"OR"

"AND"

"EXOR"

Note : Only text display is attributed, because attribute data is located in graphic RAM area.

Attribute function

"Reverse display", "Character blink" and "Inhibit" are called "Attribute". The attribute data is written in the graphic

area defined by control word set command. The mode set command selects text display only and graphic display cannot be

displayed.

The attribute data of the lst character in text area is written at the lst byte in graphic area, and attribute data of n-th

character is written at the n-th byte in graphic area. Attribute function is defined as follow.

Attribute RAM byte

Function

Normal display

Reverse display

Inhibit display

Blink of normal display

Blink of reverse display

Blink of inhibit display

240128-06-FC-R-ST-LED-GY 数据表(PDF) 19 Page - List of Unclassifed Manufacturers

240128-06-FC-R-ST-LED-GY 数据表(HTML) 19 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

数据表下载