Arduino® Nano RP2040 Connect

2 / 19

Arduino® Nano RP2040 Connect

Modified: 15/11/2024

Features

Raspberry Pi RP2040 Microcontroller

133 MHz 32bit Dual Core Arm® Cortex®-M0+

264 kB on-chip SRAM

Direct Memory Access (DMA) controller

Support for up to 16 MB of off-chip Flash memory via dedicated QSPI bus

USB 1.1 controller and PHY, with host and device support

8 PIO state machines

Programmable IO (PIO) for extended peripheral support

4 channel ADC with internal temperature sensor, 0.5 MSa/s, 12-bit conversion

SWD Debugging

2 on-chip PLLs to generate USB and core clock

40nm process node

Multiple low power mode support

USB 1.1 Host/Device

Internal Voltage Regulator to supply the core voltage

Advanced High-performance Bus (AHB)/Advanced Peripheral Bus (APB)

U-blox® Nina W102 Wi-Fi®/Bluetooth® Module

240 MHz 32bit Dual Core Xtensa LX6

520 kB on-chip SRAM

448 Kbyte ROM for booting and core functions

16 Mbit FLASH for code storage including hardware encryption to protect programs and data

1 kbit EFUSE (non- erasable memory) for MAC addresses, module configuration, Flash-Encryption, and

Chip-ID

IEEE 802.11b/g/n single-band 2.4 GHz Wi-Fi® operation

Bluetooth® 4.2

Integrated Planar Inverted-F Antenna (PIFA)

4x 12-bit ADC

3x I2C, SDIO, CAN, QSPI

Memory

AT25SF128A 16 MB NOR Flash

QSPI data transfer rate up to 532Mbps

100K program/erase cycles