7132LB Series | Optics

Arista Optics and Cables

The 7132LB Series accepts a wide range of QSFP and SFP optics and cables. The QSFP28 ports of the 7132LB Series accept QSFP optics

and cables configured at 100GE, 4x 25GE, 40GE and 4x 10GE speeds, while the SFP28 ports accept SFP optics and cables configured at

25GE and 10GE speeds. More information about Arista optics and cables can be found here.

Arista’s Enhanced Performance (E-Series) QSFP and SFP optical transceivers, such as the QSFP-100G-SR4-E, SFP-25G-SR-E and SFP-25G-

LR-E enable 100G and 25GE operation without requiring FEC, eliminating the FEC delay usually present in 100GE and 25GE optical

links. Apart from Arista’s E-Series optical transceivers, 100GBASE-LR4 and certain copper cables, all 100GE and 25GE links require FEC,

while all 10GE and lower data rates do not use FEC.

The table below summarizes the most commonly used optics and cables in the 7132LB platforms. For more details about Arista’s

pluggable optics and cables, refer to the Optics Modules and Cables Data sheet, the Arista Transceiver and Cable Guide, and Arista’s

Enhanced Performance Series Optics Q&A.

Supported 100G QSFP Optics and Cables

Application / Interface Type

Supported Optics and Cables

Description and Reach

100GBASE-CR4

CAB-Q-Q-100G-xM

QSFP to QSFP Copper Cables: 1m to 5m

4x 25GBASE-CR

CAB-Q-4S-100G-xM

QSFP to 4x SFP Breakout Copper Cables: 1m to 5m

QSFP port configured for 4x 25GE,

SFP breakout ports configured for 25GE

CAB-Q-Q-100G-xM

QSFP to QSFP Copper Cables: 1m to 5m

QSFP ports configured for 4x 25GE

100GBASE-AOC

AOC-Q-Q-100G-xM

100G QSFP to QSFP Active Optical Cables: 1m to 30m

100GBASE-SR4-E

QSFP-100G-SR4-E

(E-Series Transceiver for low latency)

30m OM3 / 50m OM4 Parallel MMF without FEC (for low latency), or

70m OM3 / 100m OM4 Parallel MMF with FEC

4x 25GBASE-SR-E

QSFP-100G-SR4-E

(E-Series Transceiver for low latency)

QSFP-100G-SR4-E Transceiver configured as 4x 25GE

30m OM3 / 50m OM4 Parallel MMF without FEC (for low latency), or

70m OM3 / 100m OM4 Parallel MMF with FEC

100GBASE-SR4

QSFP-100G-SR4

70m OM3 / 100m OM4 Parallel MMF

4x 25GBASE-SR

QSFP-100G-SR4

QSFP-100G-SR4 Transceiver configured as 4x 25GE

70m OM3 / 100m OM4 Parallel MMF

100GBASE-SRBD / SWDM4

QSFP-100G-SRBD / SWDM4

70m OM3 / 100m OM4 duplexMMF

100GBASE-PSM4 / PLRL4

QSFP-100G-PSM4 / PLRL4

500m / 2km over Parallel MMF

4x 25GBASE-LR

QSFP-100G-PSM4 / PLRL4

QSFP-100G-PSM4 / PLRL4 Transceiver configured as 4x 25GE

500m / 2km over Parallel MMF

100GBASE-LR4

QSFP-100G-LR4

10km over duplex SMF without FEC

100GBASE-LRL4

QSFP-100G-LRL4

2km over duplex SMF

100GBASE-CWDM4 / XCWDM4

QSFP-100G-CWDM4 / XCWDM4

2km / 10km over duplex SMF

100GBASE-DR / FR / LR

QSFP-100G-DR / FR / LR

500m / 2km / 10km over duplex SMF