| 数据搜索系统,热门电子元器件搜索 |
|
FACESEALS 数据表(PDF) 13 Page - France Joint |
|
|
|||||||||||||||||||||||||||||
FACESEALS 数据表(HTML) 13 Page - France Joint |
|
13 / 20 page ![]() 5�2 SURFACE ROUGHNESS The housing must be free from burrs and scratches for optimal operation. The table below sets out the recommendations for surface roughness to be followed. Roughness Contact surface area Ra ≤3�2 µm Rz ≤10�0 µm Rmax ≤16�0 µm 6. Assembly recommendations Floating seals are hard cast iron or steel precision parts. • The seal must not be removed from its original packaging until just before it is fitted, and it must protect the operational surfaces (A) from any soiling or deterioration. • The housings of the seal (B) must be clean and there must be no burrs around the installation. • The floating seals must be fitted using mounting tools (D). They are composed of two bearing shells fitted around a floating seal. In this way, the exertion required for installation is applied directly through the O'Ring (C). • The floating seal must then be inserted into the housing, and all parts must be positioned symmetrically. • The O'Rings, once put in place, must not be twisted or jammed. • Before the final fitting, a thin film of oil must be applied to the two operational parts with a lint-free cloth (e.g.: a chamois) A B C D A B B // A A B A B B // A Correct Wrong O’Ring too high Wrong EN-TETE CONTINU EN-TETE CONTINU www.francejoint.com FACE SEALS - FLOATING SEALS FACE SEALS - FLOATING SEALS 13 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |