This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture

sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305

Handling of Moisture Sensitive Surface Mount Devices for details.

A. Storage before use

- Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has

exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the

original MSL rating.

- It is not recommended to open the MBB prior to assembly (e.g. for IQC).

B. Control after opening the MBB

- The humidity indicator card (HIC) shall be read immediately upon opening of MBB.

- The LEDs must be kept at <30°C / 60%RH at all time and all high temperature related process including soldering,

curing or rework need to be completed within 672 hours.

C. Control for unfinished reel

- For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH.

D. Control of assembled boards

- If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be

stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of

672 hours.

E. Baking is required if:

- “10%” or “15%” HIC indicator turns pink.

- The LEDs are exposed to condition of >30°C / 60% RH at any time.

- The LEDs floor life exceeded 672 hours.

Recommended baking condition: 60±5°C for 20 hours.

For product information and a complete list of distributors, please go to our web site:

www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.

Data subject to change. Copyright © 007 Avago Technologies Limited. All rights reserved.

AV0-078EN - August 9, 007