Option

Test Current

Package Type

Reel Size

J1

20 mA

Top Mount

7 inch

J4

20 mA

Top Mount

1 inch

H1

20 mA

Reverse Mount

7 inch

H4

20 mA

Reverse Mount

1 inch

J2

10 mA

Top Mount

7 inch

J5

10 mA

Top Mount

1 inch

H2

10 mA

Reverse Mount

7 inch

H5

10 mA

Reverse Mount

1 inch

For product information and a complete list of distributors, please go to our website:

www.avagotech.com

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.

Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0040EN

AV02-0198EN - May 30, 2007

Moisture Sensitivity

This product is qualified as Moisture Sensitive Level 2a

per Jedec J-STD-020. Precautions when handling this

moisture sensitive product is important to ensure the

reliability of the product. Do refer to Avago Application

Note AN505 Handling of Moisture Sensitive Surface

Mount Devices for details.

A. Storage before use

- Unopen moisture barrier bag (MBB) can be stored

at <40°C/90%RH for 12 months. If the actual shelf

life has exceeded 12 months and the HIC indicates

that baking is not required, then it is safe to reflow

the LEDs per the original MSL rating.

- It is not recommended to open the MBB prior to

assembly (e.g. for IQC).

B. Control after opening the MBB

- The humidity indicator card (HIC) shall be read im-

mediately upon opening of MBB.

- The LEDs must be kept at <0°C / 60%RH at all time

and all high temperature related process including

soldering, curing or rework need to be completed

within 672 hours.

C. Control for unfinished reel

- For any unuse LEDs, they need to be stored

in sealed MBB with desiccant or desiccator at

<5%RH.

D. Control of assembled boards

- If the PCB soldered with the LEDs is to be subjected

to other high temperature processes, the PCB need

to be stored in sealed MBB with desiccant or desic-

cator at <5%RH to ensure no LEDs have exceeded

their floor life of 672 hours.

E. Baking is required if:

- “10%” or “15%” HIC indicator turns pink.

- The LEDs are exposed to condition of >0°C / 60%

RH at any time.

- The LEDs floor life exceeded 672 hours.

Recommended baking condition: 60±5°C for 20 hours.