|

|

SEAL DESIGN

Tolerance for the outside diameter of the seal (ØD)

Bore diameter

ØD1 (mm)

Apparent metal cage

Rubber coating

Coating with grooves

ØD1 ≤ 50.0

+0.10 / +0.20

+0.15 / +0.30

+0.20 / +0.40

50.0 < ØD1 ≤ 80.0

+0.13 / +0.23

+0.20 / +0.35

+0.25 / +0.45

80.0 < ØD1 ≤ 120.0

+0.15 / +0.25

+0.20 / +0.35

+0.25 / +0.45

120.0 < ØD1 ≤ 180.0

+0.18 / +0.28

+0.25 / +0.45

+0.30 / +0.55

180.0 < ØD1 ≤ 300.0

+0.20 / +0.30

+0.25 / +0.45

+0.30 / +0.55

300.0 < ØD1 ≤ 500.0

+0.23 / +0.35

+0.30 / +0.55

+0.35 / +0.65

500.0 < ØD1 ≤ 630.0

+0.23 / +0.35

+0.35 / +0.65

+0.40 / +0.75

Roundness tolerance

Bore diameter

ØD1 (mm)

Apparent metal cage

Rubber coating

ØD1 ≤ 50.0

0.18

0.25

50.0 < ØD1 ≤ 80.0

0.25

0.35

80.0 < ØD1 ≤ 120.0

0.30

0.50

120.0 < ØD1 ≤ 180.0

0.40

0.65

180.0 < ØD1 ≤ 300.0

0.25% of the outside diameter

0.80

300.0 < ØD1 ≤ 500.0

0.25% of the outside diameter

1.00

500.0 < ØD1 ≤ 630.0

-

-

Tolerance for the inside diameter of the seal (Ød)

Free and without constraint, the inside diameter of the sealing lip is always smaller than the

diameter of the shaft. The pre-tightening or interference denotes the difference between

these two values. Depending on the shaft diameter, the diameter of the sealing lip is generally

considered to be less, between 0.8 and 3.5 mm.

|

DESCRIPTION

The VCW profile is a shaft seal

composed of a single metal

cage with rubber grooves on the

outside of the cage and a primary

sealing lip without a spring.

|

ADVANTAGES

Very good static sealing

Very good thermal expansion

compensation

Greater roughness is

allowed in the housing

Reduced risk of corrosion

Easy to assemble with very

limited bounce-back effect

Sealing for high viscosity fluids

Primary sealing lip generating

low levels of friction and heat

|

APPLICATIONS

All types of rotative applications

Machine tools

Agriculture

Construction

Transmission

Gear boxes

Motors

Pumps

|

MATERIALS

Rubber

ACM 70 - 75 Shore A

EPDM 70 - 75 Shore A

FKM 70 - 75 Shore A

HNBR 70 - 75 Shore A

NBR 70 - 75 Shore A

Metal cage

Steel - AISI 1010

STANDARD SHAFT SEALS

VCW

ROTARY SEALS | STANDARD SHAFT SEALS |

VCW

QUALITY & EXPERTISE FOR YOUR SEALING NEEDS