| 数据搜索系统,热门电子元器件搜索 |
|
AMS431L 数据表(PDF) 2 Page - Advanced Monolithic Systems |
|
|
|||||||||||||||||||||||||||||
AMS431L 数据表(HTML) 2 Page - Advanced Monolithic Systems |
|
2 / 7 page ![]() Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMS431L ABSOLUTE MAXIMUM RATINGS (Note 1) Cathode Voltage (VZ) 20V Internal Power Dissipation (PD) Continuous Cathode Current (IZ) 100mA TO-92 Package 0.78W Reference Input Current (IREF) 3mA SOT-89 Package 0.91W Junction Temperature (TJ) -40 °C to +125°C SOT-23-3 Package 0.28W SOT-23-5 Package 0.3 W Storage temperature -65 °C to +150°C Thermal Resistance ( θ JA) Lead Temperature (Soldering, 25sec.) 265 °C TO-92 Package 160 °C/W SOT-89 Package 110 °C/W SOT-23-3 Package 410 °C/W SOT-23-5 Package 410 °C/W Note 1 : Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics . The guaranteed specifications apply only for the test conditions listed. ELECTRICAL CHARACTERISTICS Electrical Characteristics at IZ =10 mA and TA = +25°C unless otherwise noted. Parameter Conditions AMS431LA Min Typ Max AMS431LB Min Typ Max AMS431LC Min Typ Max Units Reference Voltage 1.234 1.240 1.246 1.228 1.240 1.252 1.215 1.240 1.265 V Deviation of Reference Input Voltage over Temperature VZ = VREF (circuit 1) TA = -40°C to +85°C 10 25 10 25 10 35 mV Ratio of Change in Reference Voltage to Cathode Voltage IZ = 10mA ∆V = from V REF -0.5 -2.7 -0.5 -2.7 -0.5 -2.7 mV/V Reference Input Current R1 =10k Ω, R2 = ∞Ω (test circuit 2) 0.15 0.5 0.15 0.5 0.15 0.5 µA Reference Input Current Deviation over Temperature R1 =10k Ω, R2 = ∞Ω TA = Full Range (test circuit 2) 0.1 0.4 0.1 0.4 0.1 0.4 µA Off State Cathode Current VZ = 6V, VREF = 0V ( test circuit 3) 0.04 0.1 0.04 0.1 0.04 0.1 µA Dynamic Output Impedance f < 1KHz, VZ = VREF IZ =100µA to 100mA (test circuit 1) 0.25 0.4 0.25 0.4 0.25 0.4 Ω Minimum Operating Current VZ = VREF (test circuit 1) 60 80 60 80 60 80 µA RECOMMENDED OPERATING CONDITIONS: Min Max Cathode Voltage, (VZ) VREF 20 V Cathode Current, (IZ) 80 µA 100mA |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |