PL02 - Pressure Limiting Valve

Data Sheet

All specifications are subject to change without notice. All sales subject to standard terms and conditions.

Ashcroft® and Trust the Shield® are trademarks of Ashcroft Inc.

For more information, see Ashcroft Brands & Trademarks

©2022 Ashcroft Inc. PL02_pressure_limiting_valve_ds_RevK_03-17-23

ashcroft.com

| 1.800.328.8258 | Contact Us

ORDERING CODE

Example:

04

PL02

A

ST

50

0010#

–XC3

Process Connection

04 - 1/2 NPT Male

04

02 - 1/4 NPT Male

Series Code

PL02 - Valve

PL02

Style (setpoint)

psi

bar/kg/cm2

A - Style A

6-36

0.4-2.5

A

B - Style B

30-85

2-6

C - Style C

75-360

5-25

D - Style D

300-850

20-60

E - Style E

750-3,600

50-250

F - Style F

3,500-5,800

240-400

G - Style G (available in 1/4˝ only)

5,800-8,700

400-600

Material

ST - 316Ti Stainless steel

ST

Instrument Connection

50 - 1/2 NPT Female

50

25 - 1/4 NPT Female

Factory Set Range (4-digit) *other ranges available on request

0000 - No set range specified (will be set mid-range for style selected)

0010# - 10 psi*

0010#

0002BR - 2 bar

Options (If choosing option(s) must include an “X”) (Options below not available when no set range is specified)

–X _ _

HY - Hydrostatic testing

NH - Stainless steel tags

C3 - Material traceability report

C3

E9 – Assembly: Instrument, pressure limiting valve, siphon(1)(2)

F7 – Assembly: Instrument, pressure limiting valve, diaphragm seal or isolation ring(1)

F9 – Assembly: Instrument, capillary, pressure limiting valve, snubber, diaphragm seal or isolation ring(1)

K2 – Assembly: Instrument, capillary, pressure limiting valve, diaphragm seal or isolation ring(1)

L2 – Assembly: Instrument, pressure limiting valve, diaphragm seal or isolation ring(1)

5G – Assembly: Instrument, pressure limiting valve(1)

JG - Internal EPDM Seal

JQ - Internal FFPM Seal

6B - Cleaned for oxygen service

(1) – Assemblies are configured in order as listed. Consult factory for details on configuration and for other assembly options.

All components in assembly must be purchased as separate items.

(2) – Coil and pig tail siphons will only be hand tightened onto the assembly for filling purposes.

2 of 2

L

[1.04]

26.5

[2.46]

62.5

½ -¼ NPT Male

[1.06]

ACROSS FLATS 27

½ -¼ NPT Male

DIMENSIONS in [ ] are decimal inches

For reference only, consult

Ashcroft for specific

dimensional drawings