RTD Temperature probes with mineral insulation, available with optional connectors.

Data Sheet

ashcroft.com

| 1.800.328.8258 | Contact Us

All specifications are subject to change without notice. All sales subject to standard terms and conditions.

Ashcroft®, Trust the Shield® are trademarks of Ashcroft Inc. For more information, see Ashcroft Brands & Trademarks

©2023 Ashcroft Inc. S81_RTD_ds_RevC_04-05-23

d

DIMENSIONS in [ ] are millimeters

For reference only, consult Ashcroft for specific dimensional drawings

HOW TO ORDER S81

TEMPERATURE PROBES:

The ordering code is built by selecting

the appropriate configuration for the

various sections of the ordering code.

The insert nominal length L is measured

from top of the cable transition piece or

center of threads to the tip of the probe.

The lead wire length LC is measured

for the base of the lead wire transition

piece to the end of the lead wire jacket.

The L length and the LC length are

added to the end of the ordering code

in millimeters.

To convert inches to millimeters

multiply by 25.4.

mm = inches x 25.4

Custom configurations are available.

d = Stem diameter

LC = Length lead wire

L = Insertion length

* 50 mm with FM approval

*

*

S81 RTD Temperature Probes

of 5

5