TL071, TL071A, TL071B, TL072

TL072A, TL072B, TL074, TL074A, TL074B

LOW NOISE JFET INPUT OPERATIONAL AMPLIFIERS

SLOS080J − SEPTEMBER 1978 − REVISED MARCH 2005

6

POST OFFICE BOX 655303

18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±30 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±15 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short circuit (see Note 4)

Unlimited

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

97

°C/W

. . . . . . . . . . . . . . . . . . . . . .

D package (14 pin)

86

°C/W

. . . . . . . . . . . . . . . . . . . . .

N package

80

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

NS package

76

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

P package

85

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PS package

95

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package (8 pin)

149

°C/W

. . . . . . . . . . . . . . . . . . .

PW package (14 pin)

113

°C/W

. . . . . . . . . . . . . . . . . .

U package

185

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

5.61

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

J package

15.05

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

JG package

14.5

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . .

W package

14.65

°C/W

. . . . . . . . . . . . . . . . . . . . . . . .

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Case temperature for 60 seconds: FK package

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: J, JG, or W package

300

°C

. . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC−.

2. Differential voltages are at IN+, with respect to IN−.

3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.

4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the

dissipation rating is not exceeded.

5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

6. The package thermal impedance is calculated in accordance with JESD 51-7.

7. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD = (TJ(max) − TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.

8. The package thermal impedance is calculated in accordance with MIL-STD-883.