PLANAR PRO

Planar Pro Linear Highbay

IP66 weatherproof rating

IK10 impact rating

Energy-efficient illumination up to 170lm/W

60x105 degree beam angle

Designed to function from -30 to 50°C

Ideal for installation in high ceiling warehouses.

ORDERING INFORMATION

Order code

15744

Description

400W 170lm/W LINEAR

HIGHBAY- CRI>80 - IP66 - DALI -

60x105D - 5000K

Driver Power

400 W

Driver Type

DALI DT6 LED Driver

DALI DT6 ~ Includes DALI-2 Driver with full support for DT6 allowing flicker free

dimming with compliant DALI-2 Application controllers.

Item Code

EV-PLANAR-

PRO-400W-60105D-50K-DA

EFFICIENCIES

Total System Efficiency

175 lm/W

The performance of each component of a luminaire is demonstrated through its

efficiencies, which together determine the total system efficiency of the

product. The output of the LED chip is first multiplied by the optical and thermal

efficiencies to calculate the Luminaire efficiency. However, this calculation does

not consider the driver efficiency. To determine the overall efficiency of the

system, the Luminaire efficiency must be multiplied by the driver efficiency,

which accounts for all losses in the system.

MECHANICAL

Body Material

Aluminium alloy

Diffuser Material

Polycarbonate

Fitting Colour

Silver

IK Rating

IK10

Installation Type

Suspended

IP Rating

IP66

ELECTRICAL

Earth Leakage

<0.75 mA

Electrical Rating

Class I

Input Current

2.8 A

Input Frequency

50 Hz

Input voltage

230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively

means that the voltage range of these products are 216Vac - 253Vac or 240V

+6%

Inrush Current

150 A

Inrush Duration

300 uS

Maximum Wattage

400 W

Power Factor

0.95

Standby Power

0.5 W

Standby power for non-maintained/switched maintained emergency devices is

measured when the light is off and the charger is in standby mode. For

maintained emergency devices, standby power is measured when the light is on

and the charger is in standby mode. Typically, charging occurs for the first 16

hours after the device is powered or after a battery discharge.

Surge Protection L/N-PE

10kV

Surge Protection L-N

6kV

Working Temp Range

-30 to 50 °C

LAMP

Macadam Steps (SDCM)

5-step MacAdam Ellipse

Beam Angle

60x105 °

CCT Configuration

Single

1300 438 658

sales@evolt.com.au

ektor.com.au

© 2025 Evolt