PIC16F84A-04SLASHSSROM datasheet(55/88 Pages) MICROCHIP

55 / 88 page

DS35007B-page 53

PIC16F84A

9.2

DC Characteristics:

PIC16F84A-04 (Commercial, Industrial)

PIC16F84A-20 (Commercial, Industrial)

PIC16LF84A-04 (Commercial, Industrial)

DC Characteristics

All Pins Except Power Supply Pins

Standard Operating Conditions (unless otherwise stated)

Operating temperature

°C

≤ TA ≤ +70°C (commercial)

-40

°C ≤ TA ≤ +85°C (industrial)

Operating voltage VDD range as described in DC specifications

(Section 9.1)

Param

No.

Symbol

Characteristic

Min

Typ†

Max

Units

Conditions

VIL

Input Low Voltage

I/O ports:

D030

with TTL buffer

VSS

—0.8

4.5V

≤ VDD ≤ 5.5V (Note 4)

D030A

VSS

—0.16VDD

Entire range (Note 4)

D031

with Schmitt Trigger buffer

VSS

—0.2VDD

Entire range

D032

MCLR, RA4/T0CKI

VSS

—0.2VDD

D033

OSC1 (XT, HS and LP modes)

VSS

—0.3VDD

(Note 1)

D034

OSC1 (RC mode)

VSS

—0.1VDD

VIH

Input High Voltage

I/O ports:

—

D040

D040A

with TTL buffer

2.0

0.25VDD+0.8

—

VDD

4.5V

≤ VDD ≤ 5.5V (Note 4)

Entire range (Note 4)

D041

with Schmitt Trigger buffer

0.8 VDD

—VDD

Entire range

D042

MCLR,

0.8 VDD

—VDD

D042A

RA4/T0CKI

0.8 VDD

—8.5

D043

OSC1 (XT, HS and LP modes)

0.8 VDD

—VDD

(Note 1)

D043A

OSC1 (RC mode)

0.9 VDD

VDD

D050

VHYS

Hysteresis of Schmitt Trigger

Inputs

—0.1

—

D070

IPURB

PORTB Weak Pull-up Current

250

400

µAVDD = 5.0V, VPIN = VSS

IIL

Input Leakage Current

(Notes 2, 3)

D060

I/O ports

—

±1

µAVss ≤ VPIN ≤ VDD,

Pin at hi-impedance

D061

MCLR, RA4/T0CKI

—

±5

µAVss ≤ VPIN ≤ VDD

D063

OSC1

—

±5

µAVss ≤ VPIN ≤ VDD, XT, HS

and LP osc configuration

†

Data in “Typ” column is at 5.0V, 25

°C unless otherwise stated. These parameters are for design guidance

only and are not tested.

Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. Do not drive the PIC16F84A with an

external clock while the device is in RC mode, or chip damage may result.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as coming out of the pin.

4: The user may choose the better of the two specs.

PIC16F84A-04/SSROM 数据表(PDF) 55 Page - Microchip Technology

PIC16F84A-04/SSROM 数据表(HTML) 55 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表下载

链接网址

PIC16F84A-04/SSROM 数据表(PDF) 55 Page - Microchip Technology

PIC16F84A-04/SSROM 数据表(HTML) 55 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表 下载

链接网址

数据表下载