LEDFIRE INBUILT

Emergency Kit for OEM

ORDERING INFORMATION

Order code

17570

Description

Ledfire Pro OEM Kit D32 White

Driver Type

DALI DT1 Emergency

Item Code

EV-LEDFIRE-OEM-PRO

MECHANICAL

Body Material

Polycarbonate

Fitting Colour

White

Installation Type

Recessed

IP Rating

IP20

ELECTRICAL

Electrical Rating

Class II

Input Frequency

50 Hz

Input voltage

230Vac

In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively

means that the voltage range of these products are 216Vac - 253Vac or 240V

+6%

Maximum Wattage

2 W

Standby Power

0.25 W

Standby power for non-maintained/switched maintained emergency devices is

measured when the light is off and the charger is in standby mode. For

maintained emergency devices, standby power is measured when the light is on

and the charger is in standby mode. Typically, charging occurs for the first 16

hours after the device is powered or after a battery discharge.

Working Temp Range

0 to 40 °C

LAMP

Lamp/LED Current

130 mA

Lamp/LED voltage

9 V

DRIVER

Driver Included

Yes

Driver Type

DALI DT1 Emergency

Wiring Type

Re-wireable terminal block (5

pin)

EMERGENCY (EM SUFFIX)

Replacement Battery Code

01302

Emergency Classification

C0:D32, C90:D32

Emergency Control

DALI Monitored (DT1)

DALI Monitored ~ Supports Emergency test and monitoring over DALI

(IEC62386) with full compliance to IEC62386-202.

Emergency Duration

90 mins

Emergency Lumen Output

208 lm

Emergency Mode

Non-Maintained

Emergency Output Power

1200 mW

1300 438 658

sales@evolt.com.au

ektor.com.au

© 2025 Evolt