Data Brief

For further information contact your local STMicroelectronics sales office

Rev 1

January 2006

1/4

4

STEVAL-IPE004V1

Electricity Meter (mono phase) - Measurement Board

1 Shunt

Features

■

Single-phase, 0.5 class accuracy guaranteed

■

■

LED checking for:

– Functioning

– No Load Condition

– Reverse Energy Direction

■

Stepper Motor Display Connector

■

Capacitive Power Supply

■

SPI Interface Connector:

– Active, Reactive Apparent Power

consumption

–Status

Applications

This metering module can be used to build a

Class

0.5

Single-phase

standalone

or

microprocessor based meter with or without

Tamper detection for power line systems of

In standalone mode, a stepper motor display

should be connected to pins W5 and W6. A user

can select the type of stepper or the constant of

output pulse frequency by changing LVS or KMOT

configurators respectively.

In Microprocessor based mode, a control board

with a microprocessor should be connected to the

male connector P1 of the module using a 10-wire

flat cable.

STEVAL-IPE004V1

www.st.com