The Embedded I/O Company

TIP605

16 Interrupt generating Digital Inputs

Application Information

The TIP605 is an IndustryPack

 compatible module with

16 digital inputs galvanically isolated by optocoupler. The

individual inputs are potential free in relation to each other.

A high performance input circuit ensures a defined

switching

point

and

polarization

protection

against

confusing the pole.

All inputs have an electronic debounce circuit with a freely

programmable debounce time. All inputs can generate an

interrupt. The signal edge handling is programmable. For

the TIP605 the operating temperature range is –40°C to

+85°C.

The driver software TIP605-SW-xx provides functions to

configure the TIP605, read the input status and connect

software events to input state changes.

Technical Information

 Interface according to IndustryPack specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 16 interrupt generating digital inputs

 24V signal voltage for inputs, other voltages on

request

 Optocouplers for galvanic isolation of input to

computer system

 All inputs isolated against each other

 All inputs protected against confusing the pole

 All inputs have an electronic debounce circuit,

debounce time is freely programmable

 Operating temperature -40°C to +85°C

 MTBF (MIL-HDBK217F/FN2 GB 20°C)

TIP605: 703000h

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.1.1

2017-08-24

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com