TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.2

2021-05-17

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com

The Embedded I/O Company

TIP710

16 Digital Outputs, High Side Switch

Application Information

The TIP710 is an IndustryPack® compatible module

providing 16 digital outputs configured as high side switch

with galvanic isolation via optocouplers.

The TIP710 directly controls up to 16 lines of all kinds of

resistive, capacitive and inductive loads.

The outputs are capable of driving 1A continuous per

channel at an external supply voltage of 6V to 48V.

All outputs resist short-circuits and are protected against

thermal overload.

After power-on or reset all channels are in the off state. A

hardware watchdog clears all outputs in case of trigger

failure.

Software Support (TIP710-SW-xx) is available for different

operating systems.

Technical Information

 Interface according to IndustryPack specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 16 digital outputs, high side switches

 Output signal voltage 6V to 48V, common to all

outputs, externally supplied

 Output current: 1A continuous per channel

 Optocouplers for galvanic isolation of outputs to

computer system

 Outputs are short-circuit protected

 Outputs protected against thermal overload

 Watchdog timer resets all channels in case of

triggering failure

 Operating temperature range

–40°C to +85°C