The Embedded I/O Company

TIP830

8 Channel 12 (16) bit Simultaneous Sampling A/D

Application Information

The TIP830 family consists of IndustryPack

 compatible

modules with 8 independent channels of high resolution

12 bit or 16 bit analog-to-digital conversion. Each channel

consists of a Sample and Hold and a 12 bit or 16 bit A/D

converter. The maximum time for sample and convert is

25µs for all channels. The full-scale input range is +/-10V.

A start-of-conversion is initiated by software command or

via the trigger I/O pin. All eight channels of the TIP830

sample and convert simultaneously.

By connecting the trigger I/O pins of several modules it is

possible to expand the simultaneous sample and convert

feature to several TIP830 modules.

Software support (TIP830-SW-xx) is available for different

operating systems.

Technical Information

 Interface according to IndustryPack® specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 Eight 12 bit (16 bit) A/D converter ( ADS8506/7 )

 Complete 12 bit (16 bit) sampling A/D converter

with internal reference

 +/- 10 V input, impedance 45 kohm

 Integral linearity error: +/- 0.9LSB (+/- 3LSB)

 Differential linearity error: +/- 0.9LSB (+3/-2LSB)

 No missing codes: 12 bits (15 bits)

 25 µs maximum for sample and convert

 Factory calibration of gain and offset for each

channel, correction parameters stored in serial

EEPROM

 Simultaneous Sample and Convert for all 8 channels,

expandable to other TIP830 by external trigger I/O pin

 Operating temperature range -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-24

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com