The Embedded I/O Company

TIP840

8 (16) Channels of 12 bit A/D Conversion

Application Information

The TIP840 is an IndustryPack

 compatible module and

provides 8 (16) single-ended channels of 12 bit A/D

conversion. The data acquisition and conversion time is up

to 10µs without channel / gain change and up to 62µs with

channel / gain change.

The input multiplexer offers analog overvoltage protection

of up to 70Vpp. A programmable gain amplifier allows

gains of 1, 10, 100 or 1, 2, 4, 8. The full-scale input range

is +/-10V. An interrupt can be generated at end-of-

conversion supporting an 8 bit vector.

Each

TIP840

is

factory

calibrated.

The

calibration

information is stored in the Identification-PROM unique to

each IP.

Software Support (TIP840-SW-xx) is available for different

operating systems.

Technical Information

 Interface according to IndustryPack specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 8 (16) single-ended or (8) differential channels of

12 bit A/D conversion

 ESD protected input multiplexer

 Programmable gain amplifier, gain 1, 10, 100 or gain

1, 2, 4, 8

 12 bit A/D converter with internal S/H and reference

 Full-scale input range +/- 10V (gain = 1)

 Interrupt capability at end-of-conversion

 Factory calibrated, calibration information in

Identification-PROM unique to each IP

 Operating temperature -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.2.1

2017-09-27

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com