H2C

H2C

6

Mounting Track (Meets DIN EN50022)

PFP-100N/PFP-50N

PFP-100N2

Twelve, 25

' 4.5 elliptic holes (see note)

(see note)

Note:

This dimension applied to PFP-50N.

Note:

A total of twelve, 25 x 4.5 elliptic holes are provided with 6

holes cut from each rail end at a pitch of 10 mm between

holes.

End Plate

PFP-M

PFP-S

Adapter for Flush Mounting

Y92F-30

Note:

The adapter can be mounted to the timer form any side of

the timer housing since the adapter security notches are

provided on all four sides of the housing.

H2C (with PF113A)

H2C-F

Note:

For a load current of 3 A max., a spacer and an end

plate are not required. For a load current of 6 A, one

spacer or an end plate is required.

Note:

For a load current of 1 A max., a spacer and an end

plate are not required. For a load current of 3 A max.,

one spacer or an end plate is required. For a load cur-

rent of 6 A max. two spacers or two end plates are re-

quired.

Timer Hold-down Clips

Y92H-2

(for PF085A/PF113A

Connecting Socket)

Y92H-1

(for PL08/PL11

Connecting Socket)

(See

note)

(See

note)

(See note)