Replacement Dowels

The dowels of the fuel moisture stick (p/n #26601) and fuel tempera-

ture stick (model CS205) are easily replaced in the field with a Phillips

screwdriver and an adjustable wrench. Customers should replace the

dowels each spring; more frequent replacements may be required in

some environments. The more wet/dry cycles the dowels experience,

the more frequently they will need to be replaced.

Ordering Information

Fuel Temperature

Must order both a fuel temperature stick and a temperature probe.

Typically the fuel temperature stick/sensor is measured along side a fuel

moisture sensor/stick. The sensors can be mounted side-by-side on a Fuel

Moisture & Temperature Mounting Stake.

CS205

10-hour Fuel Temperature Stick (requires a 107 temperature

probe; see below)

Temperature Probe

107 Temperature Probe (-35° to +50°C) Must choose a cable

length option and cable termination option (see below).

Cable Length Options (choose one)

-10 10 ft (3 m) cable length.

-17 17 ft (5 m) cable length.

-33 33 ft (10 m) cable length (recommended)

-50 50 ft (15 m) cable length

-U-L User-defined cable length. Enter length, in ft, after the -L.

Cable Termination Options for 107 (choose one)

-PT Cable terminates in stripped and tinned leads for direct

connection to datalogger’s terminals.

-PW Cable terminates in a connector for attachment to a

prewired enclosure.

-C Cable terminates in a connector for attachment to a

ET107 station or CS110 electric field meter.

Fuel Moisture

Must order both a fuel moisture stick and a moisture probe. Typically

the fuel moisture stick/sensor is measured along side a fuel temperature

sensor/stick. The sensors can be mounted side-by-side on a Fuel Mois-

ture & Temperature Mounting Stake.

#26601

10-hour Fuel Moisture Stick (requires a CS506-L Fuel Moisture

Sensor; see below)

Fuel Moisture Probes (choose one)

CS506-L Fuel Moisture Sensor/10-hour Fuel Moisture Stick with user-

specified cable length. Enter cable length, in feet, after the

-L; standard length is 25 ft. Must choose a cable termination

option (see below).

Cable Termination Options for CS506-L (choose one)

-PT Cable terminates in stripped and tinned leads for direct

connection to datalogger’s terminals.

-PW Cable terminates in a connector for attachment to a

prewired enclosure.

Mounting Stake

#10974

Fuel Moisture & Temperature Mounting Stake

Replacement Dowels

#26601

10-hour Fuel Moisture Stick

CS205

10-hour Fuel Temperature Stick

The dowels can be easily replaced using a Phillips screwdriver

and an adjustable wrench. The CS205 is shown at left.

RAWS Station Products

Fuel Sensors for RAWS Stations

CS516-QD Fuel Moisture & Temperature Sensor for the RAWS-F Quick

Deployment Fire Weather Station. Sensors have a 12-ft cable

length and are mounted on the #10974 mounting stake.

CS516-LQ

Fuel Moisture & Temperature Sensor for the RAWS-P Perma-

nently Mounted Station; must specify a fuel moisture sensor

cable length and a temperature sensor cable length (see be-

low). The sensors are mounted on the #10974 mounting stake.

Cable lengths for the CS516-LQ

Recommended cable lengths are 25, 50, 75, or 100 ft (8, 15, 23, or 31 m).

-LQ Fuel moisture sensor cable length. Enter the cable length, in

feet, after the -LQ.

-LT Temperature sensor cable length. Enter the cable length, in

feet, after the -LT.

The CS516 attaches to the connectors la-

beled FM/FT on the RAWS connector panel.