MPX4100AP datasheet(3/10 Pages) FREESCALE

3 / 10 page

MPX4100

Sensors

Freescale Semiconductor

Table 2. OPERATING CHARACTERISTICS (VS = 5.1 Vdc, TA = 25×C unless otherwise noted, P1 > P2)

Characteristic(1)

1. Decoupling circuit shown in Figure 3 required to meet electrical specifications.

Symbol

Min

Typ

Max

Unit

Pressure Range(2)

2. 1.0 kPa (kiloPascal) equals 0.145 psi.

POP

—

105

kPa

Supply Voltage(2)

4.85

5.1

5.35

Vdc

Supply Current

—

7.0

mAdc

Minimum Pressure Offset(3)

(0 to 85°C)

@ VS = 5.1 V

3. Offset (Voff) is defined as the output voltage at the minimum rated pressure.

Voff

0.225

0.306

0.388

Vdc

Full Scale Output(4)

(0 to 85°C)

@ VS = 5.1 V

4. Full Scale Output (VFSO) is defined as the output voltage at the maximum or full rated pressure.

VFSO

4.815

4.897

4.978

Vdc

Full Scale Span(5)

(0 to 85°C)

@ VS = 5.1 V

5. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the

minimum rated pressure.

VFSS

—

4.59

—

Vdc

Accuracy(6)

(0 to 85°C)

6. Accuracy (error budget) consists of the following:

• Linearity:

Output deviation from a straight line relationship with pressure over the specified pressure range.

• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to

and from the minimum or maximum operating temperature points, with zero differential pressure applied.

• Pressure Hysteresis:

Output deviation at any pressure within the specified range, when this pressure is cycled to and from the

minimum or maximum rated pressure, at 25°C.

• TcSpan:

Output deviation over the temperature range of 0 to 85°C, relative to 25°C.

• TcOffset:

Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85°C, relative to 25°C.

• Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.

———

±1.8

%VFSS

Sensitivity

V/P

—

mV/kPa

Response Time(7)

7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a

specified step change in pressure.

—

1.0

—

Output Source Current at Full Scale Output

IO+

—

0.1

—

mAdc

Warm-Up Time(8)

8. Warm-up is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.

——

—

Offset Stability(9) (10)

9. Offset stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.

10. Device is ratiometric within this specified excitation range.

——

±0.5

—

%VFSS

Table 3. MECHANICAL CHARACTERISTICS

Characteristic

Symbol

Min

Typ

Max

Unit

Weight, Basic Element (Case 867)

—

4.0

—

Grams

Common Mode Line Pressure(1)

1. Common mode pressures beyond specified may result in leakage at the case-to-lead interface.

———

690

kPa

MPX4100AP 数据表(PDF) 3 Page - Freescale Semiconductor, Inc

MPX4100AP 数据表(HTML) 3 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10

数据表下载

链接网址

MPX4100AP 数据表(PDF) 3 Page - Freescale Semiconductor, Inc

MPX4100AP 数据表(HTML) 3 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10

数据表 下载

链接网址

数据表下载