SmartBond TINY Bluetooth® LE Module

R18DS0042EE0300 Revision 3.0

June 21, 2024

CFR0011-120-00

Page 10

5.

Characteristics

All MIN/MAX specification limits are guaranteed by design, production testing, and/or statistical characterization.

Typical values are based on characterization results at default measurement conditions and are informative only.

Default measurement conditions (unless otherwise specified): VBAT = 3.0 V, TA = 25

°C. All radio measurements

are done with standard RF measurement equipment.

5.1

Absolute Maximum Ratings

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.

These are stress ratings only, so functional operation of the device at these or any other conditions beyond

those indicated in the operational sections of the specification are not implied. Exposure to Absolute Maximum

Rating conditions for extended periods may affect device reliability.

Table 2: Absolute maximum ratings

Parameter

Description

Conditions

Min

Max

Unit

VBAT_LIM

Limiting battery supply voltage

-0.2

3.6

V

5.2

Recommended Operating Conditions

Table 3: Recommended operating conditions

Parameter

Description

Conditions

Min

Typ

Max

Unit

VBAT

Battery supply voltage

Voltage range within FLASH

programming is possible

1.65

3.6

V

VBAT_NOM

Nominal battery supply voltage

3

V

VPIN

Voltage on a pin

-0.2

3.6

V

TA

Ambient operating temperature

-40

25

85

°C

5.3

Device Characteristics

Table 4: DC characteristics

Parameter

Description

Conditions

Min

Typ

Max

Unit

IBAT_ACTIVE

Battery supply current

CPU running CoreMark from

RAM at 16 MHz.

0.47

mA

IBAT_BLE_ADV_

100ms

Average battery supply current

System in Advertising state (3

channels) every 100 ms and

extended sleep with all RAM

retained. TX output power at 3

dBm. FLASH is off.

79

μA

IBAT_BLE_CONN

_30ms

Average battery supply current

System in a connection state

with 30 ms connection interval

and extended sleep with all

RAM retained. TX output

power at 3 dBm. FLASH is off.

105

μA

IBAT_FLASH

Battery supply current

CPU fetching code from serial

FLASH. RF is off.

0.6

mA

IBAT_HIBERN

Battery supply current

System shut down

(Hibernation or shipping

mode). FLASH is off.

0.9

μA

IBAT_IDLE

Battery supply current

CPU in Wait for Interrupt

Mode. FLASH is off.

0.22

mA