FS4012D datasheet(49/86 Pages) POSITRONIC

49 / 86 page

Size 20 Signal Contacts

Size 8 Power Contacts

UL Recognized

File #E49351

CSA Recognized

File #LR54219

Telecommunication

UL File #14095

The Combo-Dual Port connector series offers several

combinations of power and signal contacts within

the same connector assembly.

Seventeen different

combinations of power and signal contact stacked

assemblies are available within four standard shell sizes.

The connector assembly can be partially populated

with either signal or power contacts installed in the

connector bodies to customer selected contact positions.

The stacked connectors may be spaced apart to two

dimensional spacings.

On special order, the right angle (90°) printed board

mount contacts may be replaced with size 8 power,

shielded or high voltage contacts having crimp or

solder cup terminations. Signal contacts remain in dual

port configuration.

Mounting angle brackets can be ordered riveted to

the connector by specifying R2, R6, R7 and R8 options.

Locking systems are available utilizing 4-40 threaded

jackscrew systems, polarized or non-polarized, or with

a quick-release vibration lock system for rear panel

mounted connectors.

Combo-Dual Port series connectors comply with the

dimensional requirements of IEC 60807-2 and DSCC

85039.

Jackscrew Systems:

Brass or steel with zinc plate and

chromate seal or clear zinc plate or tin

plate; stainless steel, passivated.

Vibration Lock Systems:

Lock tabs, steel with nickel plate.

Non-magnetic versions are available, contact Technical Sales.

MECHANICAL CHARACTERISTICS:

Signal Contacts:

Size 20 contacts, male – 0.040 inch

[1.02mm] mating diameter. Female

contact – rugged open entry. PosiBand

closed entry female options are also

available.

Contact Retention

In Insulator:

9 lbs. [40N]

Contact Terminations:

Printed board mount with right angle

(90°) terminations supported by

alignment bar. Termination diameter

0.028 inch [0.71mm].

Power Contacts:

Size 8 contact, male – 0.142 inch

[3.61mm] mating diameter.

MATERIALS AND FINISHES:

Insulator:

Glass filled polyester per ASTM D 5927 UL

94, blue color, and composite.

Contacts:

Precision machined copper alloy.

Contact Plating:

SIGNAL:

Gold flash over nickel plate. Other finishes

available upon request.

POWER:

Gold flash over nickel. Other finishes

available upon request.

Shells:

Steel with tin plate; zinc plate with

chromate seal; stainless steel passivated.

Other materials and finishes available upon

request.

Mounting Spacers

Nylon; polyester; copper alloy or steel with

and Brackets:

zinc plate and chromate seal or tin plate;

phosphor bronze with tin plate; stainless

steel, passivated.

Cross Bar:

Nylon, UL 94V-0, black color.

Push-On Fasteners:

Beryllium copper, tin plated.

TECHNICAL CHARACTERISTICS

continued on next page. . . .

PROFESSIONAL, INDUSTRIAL AND MILITARY QUALITY

THREE PERFORMANCE LEVELS FOR BEST COST/PERFORMANCE RATIO

VERTICALLY STACKED STANDARD DENSITY PCB MOUNT

Combo-D

D-Sub

Positronic

connectpositronic.com

DIMENSIONS ARE IN INCHES [MILLIMETERS].

ALL DIMENSIONS ARE SUBJECT TO CHANGE.

FS4012D 数据表(PDF) 49 Page - Positronic.

FS4012D 数据表(HTML) 49 Page - Positronic.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

数据表下载