12

EIO0000000377 00 04/2009

Ramps:

Chapter 3 Example of functions

This function allows a sequence of setpoints (up to 16 ramps for REG48 and REG96) during a

certain period of time. For each setpoint, a response time and the duration of the level can be

setup.

These times can be defined in hour and minutes or in minutes and seconds.

Example:

TM1r

TM1s

TM2r

TM2s

TM3r

TM3s

TM4r

TM4s

Ramp 1

Ramp 2

Ramp 3

Ramp 4

Pid 2 :

Choice of a PID that avoid overshoot during the regulation phase.

Soft start :

Moderate starting up, the time of establishment (the process value reaches the setpoint) is

adjustable. This function can be used in the case of machines sensitive to the abrupt variations of

temperature.

Alarms:

One to 3 alarms are available depending the models. Each alarm is based on an output relay

(1 to 3A depending the model). Two more alarms are available through Modbus on REG96 and one

on the REG48 models.

The alarms can be configured for a low or high level and can also be delayed.