Doc. No:

TTDS 205 Rev1

TECHNICAL DATASHEET

Tyco Electronics

ESSW

Tyco Electronics idento GmbH

Paul-Ehrlich-Straße 23

D-63322 Rödermark

Tel.: 06074/8908-0

Tyco Electronics Idento

ZI de Comboire - 1 rue des

Montagnes de Lans

F-38130 Echirolles

Phone: +33 (0) 476 099 696

Author: M Priddle

Print date: 29-Jun-10

Updated:8-Jun-10

Page:

1 of 2

All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application.

Tyco Electronics Corporation makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics’ only

obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential

damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves

the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.

ESSW – pre-printed, laminated, self-adhesive safety and warning signs.

Label material

Polyester, clear gloss on soft vinyl, gloss yellow

Adhesive layers

Permanent pressure sensitive acrylic

Liner

Glassine

Dimensions:

PET Face material:

thickness

Adhesive:

coating wt.

Vinyl:

thickness

0.023mm ±10%

18g/m

2 ±10%

0.07mm ±10%

ASTM D374-88

FTM-12

ASTM D374-88

Peel Adhesion at 23°C

Stainless steel

540 N/m

FTM 1 (72 hour dwell)

Average values

Service Temperature

-30ºC to +120 ºC

Minimum application temperature

10 ºC

Print permanence

Dry rub

Print legible after 500+ rubs

SAE-AS-81531