7

Figure 14. Recommended Soldering Land Pattern

Note: Recommended stencil thickness

is 0.1524mm (6 mils) minimum and

above

5.2

2.1

Figure 15. Recommended Pick and Place Nozzle Tip (Urethane PAD Tip)

Figure 16. Recommended Leaded Reflow Soldering Profile

Figure 17. Recommended Pb- Free Reflow Soldering Profile

Note: For detail information on reflow soldering of Avago Surface Mount LED, do refer to Avago Application Note AN1060 Surface Mounting SMT LED

Indicator Components.

240°C MAX.

20 SEC. MAX.

3°C/SEC.

MAX.

120 SEC. MAX.

TIME

183°C

100-150°C

-6°C/SEC.

MAX.

60-150 SEC.

3°C/SEC. MAX.

217°C

200°C

60 - 120 SEC.

6°C/SEC. MAX.

3 °C/SEC. MAX.

3°C/SEC. MAX.

150°C

255 - 260 °C

100 SEC. MAX.

10 to 30 SEC.

TIME

4.00

5.00

Pick &

Place

Nozzle

Nozzle Depth

Note:

1. Nozzle depth should be touching LED flange during pick and place.

2. Nozzle width should be able to fit into LED carrier tape

LED Flange