 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
AD4080BBCZ 数据表(PDF) 27 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD4080BBCZ 数据表(HTML) 27 Page - Analog Devices |
|
|
27 / 94 page  Data Sheet AD4080 THEORY OF OPERATION analog.com Rev. A | 27 of 94 SOFTWARE RESET This reset method must only be used once the AD4080 is in an idle state, where conversions are not being clocked, and any existing conversion is completed. A software reset is achieved by issuing the following two writes to the Interface Configuration A register (see the Interface Configura- tion A Register section, Address 0x00): 1. Set SW_RESET and SW_RESETX bits to 1 by writing 0x81 to the register. 2. Then, issue another write command that sets either or both of those bits to 0. This action returns any previously configured registers to their default settings, except for the ADDR_ASCENSION bit from the Interface Configuration A register, which keeps its previous value. The contents of the FIFO, if any, are also not affected by the software reset. The ADDR_ASCENSION bit and FIFO data only return to their default settings after a hardware reset or a full power-up happens. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
