2

7

Product Specification

ATS

Transient Voltage Suppressors

Circuit Protection

www.yageo.com

Jul. 05, 2023 V.3

Transient Voltage Suppressors (TVS) Data Sheet

Features

■ Glass passivated junction

■ Low inductance

■ Excellent clamping capability

■ 6000

W peak pulse power capability at 10/1000μs waveform,

repetition rate (duty cycle): 0.05%

■ Fast response time

■ High Temperature soldering guaranteed: 265℃

/10 seconds/.375″,

(9.5mm) lead length, 5lbs (2.3kg) tension

■ Plastic package has underwriters laboratory flammability 94V-0

■ Meets MSL level 1, per J-STD-020

■ AEC-Q101 qualified

■ IEC61000-4-2 ESD 30KV Air, 30KV contact compliance

Mechanical Data

■ Case: Moulded plastic over glass passivated junction

■ Terminal: Plated Axial leads, solderable per MIL-STD-750, Method 2026

■ Mounting Position: Any

■ Weight: 2.46g

Applications

■ I/O interface

■ Low frequency signal transmission line (RS232, RS485, etc.)

■ AC/DC power supply

■ Meets ISO7637-2 surge spec.

Maximum Ratings and Characteristics

Ratings at 25℃ ambient temperature unless otherwise specified.

Rating

Symbol

Value

Units

Peak pulse power dissipation at 10/1000μs waveform

(Note1, Fig.2)

PPPM

Minimum

6000

Watts

Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)

IPPM

See Table

Amps

Steady state power dissipation at TL=75℃ (Fig.5)

PM(AV)

8.0

Watts

Peak forward surge current, 8.3ms single half sine-wave

superimposed on rated load, (JEDEC Method) (Note2, Fig.6)

IFSM

300

Amps

Operating junction and Storage Temperature Range.

TJ,TSTG

-55 to +150

℃

Typical thermal resistance junction to lead

RθJL

8

℃/W

Typical thermal resistance junction to ambient

RθJA

40

℃/W

Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2.

2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.