数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

TS1051CSRL 数据表(PDF) 3 Page - Taiwan Semiconductor Company, Ltd

部件名 TS1051CSRL
功能描述  Constant Voltage and Constant Current Controller For Battery Chargers and Adaptors
PDF  9 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  TSC [Taiwan Semiconductor Company, Ltd]
网页  http://www.taiwansemi.com
标志 TSC - Taiwan Semiconductor Company, Ltd

TS1051CSRL 数据表(HTML) 3 Page - Taiwan Semiconductor Company, Ltd

  TS1051CSRL Datasheet HTML 1Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 2Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 3Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 4Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 5Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 6Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 7Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 8Page - Taiwan Semiconductor Company, Ltd TS1051CSRL Datasheet HTML 9Page - Taiwan Semiconductor Company, Ltd  
Zoom Inzoom in Zoom Outzoom out
 3 / 9 page
background image
TS1051
Constant Voltage and Constant Current Controller
For Battery Chargers and Adaptors
3/9
Version: B07
Typical Adapter or Battery Charger Application Circuit
* In the above application schematic, the TS1051 is used on the secondary side of a fly-back adapter (or battery
charger) to provide an accurate control of voltage and current. The above feedback loop is made with an optocoupler.
Principle of Operation and Application Hints
Voltage Control
The voltage loop is controlled via a first trans-conductance operational amplifier, the resistor bridge R1, R2, and the
optocoupler which is directly connected to the output.
The relation between the values of R1 & R2 should be chosen as following:
*R1=R2 x Vref / (Vout-Vref)
Where Vout is the desired output voltage.
To Avoid the discharge of the load, the resistor bridge R1 & R2 should be highly resistive. For this type of application, a
total value of 100KΩ (or more) would be appropriate for the resistors R1 & R2. As an example, with R2=100KΩ,
Vout=4.10V, Vref=1.21V, then R1=41.9KΩ.
Note that if the low drop diode should be inserted between the load and the voltage regulation resistor bridge to avoid
current flowing from the load through the resistor bridge, this drop should be taken into account into the above
calculations by replacing Vout by (Vout + Vdrop).



Html Pages

1 2 3 4 5 6 7 8 9


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com