BUF04701

2

SBOS214B

www.ti.com

Supply Voltage, V+ to V– ................................................................. 13.2V

Signal Input Terminals, Voltage(2) ................... (V–) –0.5V to (V+) + 0.5V

Current(2) .................................................... 10mA

Output Short-Circuit(3) .............................................................. Continuous

Operating Temperature .................................................. –40

°C to +125°C

Storage Temperature ..................................................... –65

°C to +150°C

Junction Temperature .................................................................... +150

°C

Lead Temperature (soldering, 10s) ............................................... +300

°C

NOTES: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may

degrade device reliability. (2) Input terminals are diode-clamped to the

power-supply rails. Input signals that can swing more than 0.5V beyond the

supply rails should be current-limited to 10mA or less. (3) Short-circuit to

ground, one amplifier per package.

ABSOLUTE MAXIMUM RATINGS(1)

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas Instru-

ments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling

and installation procedures can cause damage.

ESD damage can range from subtle performance degrada-

tion to complete device failure. Precision integrated circuits

may be more susceptible to damage because very small

parametric changes could cause the device not to meet its

published specifications.

SPECIFIED

PACKAGE

TEMPERATURE

PACKAGE

ORDERING

TRANSPORT

PRODUCT

PACKAGE-LEAD

DESIGNATOR

RANGE

MARKING

NUMBER

MEDIA, QUANTITY

Quad

BUF04701

MSOP-10

DGS

–40

°C to +125°C

BUF04701

BUF04701AIDGSR

Tape and Reel, 2500

BUF04701

TSSOP-14

PW

–40

°C to +125°C

04701A

BUF04701AIPWR

Tape and Reel, 2500

NOTE: (1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.

PACKAGE/ORDERING INFORMATION(1)